User's Manual

Chapter 1: System Overview 19
©
Datamatic, Ltd. 2000 - 2004
! From the meter record, on the ROADRUNNER 860 press SHIFT I or F5 on the
ROADRUNNER X7 to access the FIREFLY Menu.
Or,
! Press F1 , 4 , then 6 to access the FIREFLY Menu.
! Choose 5 Profile Extract from the FIREFLY Menu.
—FIREFLY Config—
1.Templates
2.Program FF
3.Program Indiv Param
4.Current Settings
5.Profile Extract
6.Set Reading Mode
7.Enter AutoCAL
8.Exit AutoCAL
9.Test RF Reception
A.TEST OPTICS
B.Diagnostics
C.Options
D.Captue Config
E.AutoCAL Rules
F.Clear Tamper
The ROADRUNNER extracts the profile data from the MIU.
Receiving Interval
Data
Progress
XX %
Please Standby
The process takes up to 60 seconds with water FIREFLYs and 2 minutes on electric or
gas.
After data has been successfully validated, the following screen displays:
____________________
Interval Data
Successfully Read
____________________