User's Manual

Chapter 2: Installation RouteSTAR FIREFLY
8 © Datamatic, Inc. 1999 Version 2.2
6. Choose one of the following three options to connect the wires to the 240VAC terminals on
the meter.
Option A. Use fuse clip to attach wires to the 240VAC terminals on the meter.
Option B. Use soldering to attach two wires to the 240VAC terminals on the meter.
Option C. Use female insulated crimp connector to connect the wires to the 240VAC terminals
on the meter.
Note: If connectors are used
in place of soldering, use UL-
certified crimper.
7. Power the meter with 240VAC or power the FIREFLY using between 5 and 12 volts applied
to the external battery jack.
Note: The FIREFLY requires
240VAC during programming
for the settings to be written
to its memory.
8. Zero out the register.
Fuse clip option Solder wires option Insulated crimp connector option