User's Manual

Chapter 2: FIREFLY Installation 7
©
Datamatic.com, Ltd. 2000 - 2002
Note: The
FIREFLY
requires 240VAC during programming for the
settings to be written to its memory.
7. Power the meter with 240VAC or power the
FIREFLY
using between 5 and 12 volts
applied to the external battery jack.
8. Zero out the register.
MODIFICATIONS
The Federal Communications Commission (FCC) places power limits upon devices that
transmit as intentional radiators. This equipment has been tested and found to comply
with the limits for an intentional radiator, pursuant Part 15 of the FCC Rules. This
equipment generates, uses and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause interference to radio
communications. Changes or modifications not expressly approved by Datamatic could
void the user’s authority to operate the
FIREFLY
equipment.