User's Manual

UM00xxxx _LAB MAX III_ User Manual – v. 0.0 March 2012 _Draft
9
3 Managing the menu
3.1 Find your way in the menu
Switch on the reader by pressing the button, please refer to chapter 2.2.1.
In order to open the main menu press SELECT LEFT button on the keypad, as shown in the following
picture:
The display shows the following figure:
Figure 3.1.1
You can scroll through the menu by pressing the SELECT LEFT button. In order to enter a sub menu,
you have to press the button while it is highlighted. In order to exit the main menu and return in
initial state of reader you have to press the SELECT RIGHT.
3.1.1 Parameters
The button is used to select and confirm the changes made through the parameters. While the
parameter is selected you must press the button for more than 2 seconds to cancel the change
and go back into the main menu. The SELECT LEFT and the SELECT RIGHT buttons are used for
change the parameter value, as shown in followings pictures:
Figure 3.1.2 Figure 3.1.3