User's Manual

UM00xxxx _LAB MAX III_ User Manual – v. 0.0 March 2012 _Draft
35
6.3.2 Command: .ATNG
It starts the antenna autotuning, as shown in following example:
User: .ATNG
LAB MAX III answer: Autotuning: 7 : 3087
6.3.3 Command: .DTNG (only for debug mode)
It starts/stop the debugging antenna tuning level, as shown in following example:
User: .DTNG
LAB MAX III answer: Tuning level: 3913 (3856, 385)
Tuning level: 3907 (3856, 385)
Tuning level: 3920 (3856, 385)
Tuning level: 3917 (3856, 385)
Tuning level: 3915 (3856, 385)
Tuning level: 3908 (3856, 385)
User: .DTNG
6.3.4 Command: .SDATE
It set the date using dd/mm/yyyy format, as shown in following example:
User: .SDATE 31/10/2011
LAB MAX III answer: Date: 31/10/2011
6.3.5 Command: .STIME
It set the time using hh:mm:ss format, as shown in following example:
User: .STIME 16:40:30
LAB MAX III answer: Time: 16:40:30
6.3.6 Command: .GDATE
It gets the date using the dd/mm/yyyy format, as shown in following example:
User: .GDATE
LAB MAX III answer: Date:31/10/2011
6.3.7 Command: .GTIME
It get the time using the hh:mm:ss format, as shown in following example:
User: .GTIME
LAB MAX III answer: Time: 10:07:18
6.3.8 Command: .BLUD
Command reserved to specialized personnel (service and support and/or repair centers).