User's Manual

UM00xxxx _LAB MAX III_ User Manual – v. 0.0 March 2012 _Draft
32
5 Connectors
5.1 Power Supply Input
The LAB MAX III has to be connected to the Power Switching Adapter in order to supply the reader.
The power supply is a switching unit used by laptop computers and is compatible with the power
source worldwide, and the output power is 12VDC with 2A.
Power supply: 100-240VAC/0.5A/47-63Hz 12 VDC 2 A. The power supply has the earth connected to
the GND. On the Jack connector the positive (plus) is at the center pin.
Figure 5.1.1
5.2 USB interface
The reader is provided with an USB cable in order to connect it to the PC as Mass Storage Device or
via Virtual COM Port as explained in next chapter.