User's Manual

UM00xxxx _LAB MAX III_ User Manual – v. 0.0 March 2012 _Draft
24
3.9.1 Autotuning RFID
The Autotuning RFID test shows the values of tuning position and power.
Figure 3.9.2 Figure 3.9.3
3.9.2 Read Cycle
This feature allows changing the time of one cycle of reading. Note that it has to be higher than the
Read timeout set in RFID menu.
Figure 3.9.4
3.9.3 Cyclic Test
This feature starts the reading cyclic test.
The cycle is composed by two parts:
1. A reading time of the amount of seconds set in the Read timeout in RFID menu
2. A pause time of the amount of time set in Read Cycle minus the reading time.
Figure 3.9.5