User's Manual

UM00xxxx _LAB MAX III_ User Manual – v. 0.0 March 2012 _Draft
15
e) Wait until the reader restart and go in Setup menu, then choose Update loader as shown in the
following picture.
Figure 3.3.5
f) If the update has been successfully executed the reader sends a firmware update audio signal and
makes a shutdown, otherwise it makes an error short sound.
g) Press the button to start the reader.
h) In case of error, restart from step a), since no valid file has been found by the reader to start the
firmware update.
3.3.3 Bluetooth
This feature allows switching on or off the Bluetooth communication.
Figure 3.3.6