User's Manual

UM00xxxx _LAB MAX III_ User Manual – v. 0.0 March 2012 _Draft
14
3.3.2 Update loader
This feature allows uploading the bootloader in the reader.
A valid bootloader image must be downloaded in the reader, using the following procedure:
a) Shutdown the reader and connect it to the PC , using the USB cable.
b) Open Computer and select the LAB MAX III (typically E:), as shown in Figure 3.3.3.
Figure 3.3.3
c) Open the folder “sys” and insert the file IAPLabMaxIII.bin, as shown in Figure 3.3.4.
Figure 3.3.4
d) Disconnect the reader from the PC.