Install Instructions
Table Of Contents
- Before you start
- Components of a fence monitoring system
- How does fence monitoring work?
- Overview of the installation process
- Unpacking the box
- Other items you will need
- Datamars Livestock Monitoring web and mobile phone apps
- Datamars Livestock Monitoring web app
- Datamars Livestock mobile app
- Installing the gateway
- Choosing a suitable location
- Mounting and preparing the gateway
- Setting up the gateway using the Datamars Livestock app
- Installing the nodes
- Parts of the node
- Pairing the nodes using the Datamars Livestock app
- Installing the nodes using the Datamars Livestock app and mounting them on the fence
- Using the Datamars Livestock Monitoring apps
- Getting help
- Help articles and videos
- Troubleshooting
- Maintenance and servicing
- Solar panel maintenance
- Servicing
- Europe - Instructions for disposal of product
- Warranty
- Compliance
- FCC ID information
- FCC notice
- FCC warning
- Responsible party in the USA
- ISED Canada ID information
- ISED Canada notice
- ISED Canada warning
- UK declaration of conformity
- EU declaration of conformity
9
Mounting and preparing the gateway
To install the gateway you will need:
Gateway and power adaptor (supplied)
2 x gateway mounting screws (supplied)
Impact driver and pozi drive screw bit
Ethernet cable (if using a wired internet connection)
Extension lead (if necessary)
Waterproof sealing tape (if using a wired internet connection outside)
A mobile phone with the Datamars Livestock app installed.
To mount and prepare the gateway:
1. Insert the two pan pozi screws supplied into a wall or stud. The screws should
be 60 mm (2 5/16”) apart to match the mounting holes on the back of the
gateway and the screw heads should protrude 5 mm (1/4”) from the wall.
2. Hang the gateway upon the two screws, adjusting the screws if necessary to
ensure a snug fit.
3. Remove the battery tab on the back of the gateway to activate the battery.
4. Connect the gateway to the power supply using the USB lead and power
adaptor supplied. You may need to use an extension lead. Turn on the power
supply.
5. If you are using a wired internet connection (optional), connect the gateway to
your modem using an ethernet cable.