Install Instructions
Table Of Contents
- Before you start
- Components of a fence monitoring system
- How does fence monitoring work?
- Overview of the installation process
- Unpacking the box
- Other items you will need
- Datamars Livestock Monitoring web and mobile phone apps
- Datamars Livestock Monitoring web app
- Datamars Livestock mobile app
- Installing the gateway
- Choosing a suitable location
- Mounting and preparing the gateway
- Setting up the gateway using the Datamars Livestock app
- Installing the nodes
- Parts of the node
- Pairing the nodes using the Datamars Livestock app
- Installing the nodes using the Datamars Livestock app and mounting them on the fence
- Using the Datamars Livestock Monitoring apps
- Getting help
- Help articles and videos
- Troubleshooting
- Maintenance and servicing
- Solar panel maintenance
- Servicing
- Europe - Instructions for disposal of product
- Warranty
- Compliance
- FCC ID information
- FCC notice
- FCC warning
- Responsible party in the USA
- ISED Canada ID information
- ISED Canada notice
- ISED Canada warning
- UK declaration of conformity
- EU declaration of conformity
12
The pairing process must take place next to the gateway, before the nodes are
installed on the farm. All nodes should be paired at the same time. Make sure that
your mobile phone is connected to the internet.
To pair the nodes on the mobile app:
1. Position yourself beside the gateway with all the fence nodes in your system,
the mag key and your mobile phone.
2. Remove the battery tab on the node to activate the battery.
3. Launch the Datamars Livestock app.
4. Tap , My Devices, then Add device.
5. Tap Fence monitoring node.
6. Follow the steps to pair the node. When prompted, scan the QR code.
Alternatively, enter the serial number and MAC address. Tap the mag key on
the reset symbol when requested.
7. Once pairing is complete, pair the remaining nodes.