Quick Reference Guide

Cleaning Procedure
46 Gryphon™ I GBT/GM4500
Cleaning Procedure
Proper cleaning is needed on the external plastic surfaces,
output window and electrical contacts to guarantee reli-
able scanning and charging of the battery.
A regular cleaning routine will remove the dust and dirt
that may accumulate on the product over time. The main-
tenance activity may be repeated more frequently depend-
ing on the severity of the environment in which the
scanner is used.
A periodic deeper cleaning is suggested once per month.
Cleaning plastic surfaces
Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Follow the procedures described in this instruction sheet
to keep your Gryphon device in good operating condition.
Common Cleaning Solutions
The cleaners and disinfectants listed below are tested for
use on Datalogic’s Disinfectant-Ready Enclosures:
CAUTION
DO NOT use abrasive pads or cleaning agents.
CAUTION
Be sure to turn off power and unplug the device
from electrical outlet before cleaning.
Cleaners Disinfectants
Formula 409® Glass and sur-
face cleaner
CaviWipes™
Isopropyl alcohol Clorox® bleach
Dish soap and water Hepacide Quat® II
Windex® Original (Blue)
Sani-Cloth®
Virex® II 256