Quick Reference Guide
Table Of Contents
- Gryphon™ I GBT/GM4500
- Table of Contents
- END USER SOFTWARE LICENSE AGREEMENT
- About the Scanner
- Setting Up the Reader
- Reader, Cradle and LEDs Description
- Connecting the Base Station
- System and Network Layouts
- Using the GBT/GM4500 Scanner
- Using the WLC4090 Radio Base
- Replacing the Battery Pack
- Using the Gryphon™ I GBT/GM4500
- Linking the Reader
- Link Scanner as Serial Device to a Bluetooth Host
- Link Scanner as HID device to a Bluetooth host
- Power Off
- Selecting the Interface Type
- Programming
- Reading Parameters
- Operating Modes
- Technical Features
- LED and Beeper Indications
- Troubleshooting
- Ergonomic Recommendations
- Cleaning Procedure
- Support Through the Website
- Charging the Batteries
- Datalogic Limited Factory Warranty
Troubleshooting
44 Gryphon™ I GBT/GM4500
Troubleshooting
Problem Possible Cause
Possible
Solutions
Nothing happens when
the scan
button is pulled.
No power to the
imager.
Check system power.
Ensure power supply is
connected.
Interface or power
cables are loose.
Ensure all cable con-
nections are secure.
LED comes on, but bar
code does not decode.
Imager not pro-
grammed for correct
bar code type.
Ensure imager is pro-
grammed to read the
type of bar code
scanned. Refer to the
PRG for more informa-
tion.
Bar code label is
unreadable.
Check the label to
ensure it is not
defaced. Try scanning
another bar code type.
Distance between
imager and bar code is
incorrect.
Move imager closer to
or further from the bar
code.
Bar code is decoded
but not transmitted to
the host.
Imager not pro-
grammed for the cor-
rect host type.
Scan the appropriate
host type bar code.
Refer to the PRG for
more information.
NOTE
For detailed troubleshooting, refer to the PRG
(Product Reference Guide)