Quick Reference Guide
Table Of Contents
- Gryphon™ I GBT/GM4500
- Table of Contents
- END USER SOFTWARE LICENSE AGREEMENT
- About the Scanner
- Setting Up the Reader
- Reader, Cradle and LEDs Description
- Connecting the Base Station
- System and Network Layouts
- Using the GBT/GM4500 Scanner
- Using the WLC4090 Radio Base
- Replacing the Battery Pack
- Using the Gryphon™ I GBT/GM4500
- Linking the Reader
- Link Scanner as Serial Device to a Bluetooth Host
- Link Scanner as HID device to a Bluetooth host
- Power Off
- Selecting the Interface Type
- Programming
- Reading Parameters
- Operating Modes
- Technical Features
- LED and Beeper Indications
- Troubleshooting
- Ergonomic Recommendations
- Cleaning Procedure
- Support Through the Website
- Charging the Batteries
- Datalogic Limited Factory Warranty
Using the Gryphon™ I GBT/GM4500
Quick Reference Guide 17
Linear Bar
A red beam illuminates the label. The field of view indi-
cated by the aiming system will be smaller when the
reader is closer to the bar code and larger when it is farther
from the code. Symbologies with smaller bars or elements
(mil size) should be read closer to the unit. Symbologies
with larger bars or elements (mil size) should be read far-
ther from the unit.
If the aiming system is centered and the entire bar code is
within the aiming field, you will get a good read. Successful
reading is signaled by an audible tone plus a good-read
green spot LED indicator.
Refer to the Gryphon I GBT/GM4500 Product Reference
Guide (PRG) for more information about this feature and
other programmable settings.
Relative Size and Location of Green Spot