Quick Reference Guide
Table Of Contents
- Gryphon™ I GBT/GM4500
- Table of Contents
- END USER SOFTWARE LICENSE AGREEMENT
- About the Scanner
- Setting Up the Reader
- Reader, Cradle and LEDs Description
- Connecting the Base Station
- System and Network Layouts
- Using the GBT/GM4500 Scanner
- Using the WLC4090 Radio Base
- Replacing the Battery Pack
- Using the Gryphon™ I GBT/GM4500
- Linking the Reader
- Link Scanner as Serial Device to a Bluetooth Host
- Link Scanner as HID device to a Bluetooth host
- Power Off
- Selecting the Interface Type
- Programming
- Reading Parameters
- Operating Modes
- Technical Features
- LED and Beeper Indications
- Troubleshooting
- Ergonomic Recommendations
- Cleaning Procedure
- Support Through the Website
- Charging the Batteries
- Datalogic Limited Factory Warranty
Connecting the Base Station
8 Gryphon™ I GBT/GM4500
Securing the DC Power Cord (Optional)
The DC power cord for the adapter can be secured to
the bottom of the base in order to maximize the
mechanical retention of the cable itself. The routing of
the power cord can be changed to accommodate base
station positioning: horizontal, stand or wall mount.
The cables can be looped around to the front of the
Base Station, or fed directly out the back of the Base
Station, as shown in
Figure 6.
Figure 6. Options for routing the DC cord