Quick Reference Guide

Setting Up the Reader
2 Gryphon™ I GBT/GM4500
Decoding
The Gryphon™ I GBT/GM4500 reliably decodes all standard
1D (linear) and 2D bar codes, including GS1 DataBar™ linear
codes, Postal Codes (China Post), Stacked Codes (such as
GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1
DataBar, Stacked Omnidirectional). The data stream -
acquired from decoding a symbol - is rapidly sent to the
host. The reader is immediately available to read another
symbol.
Setting Up the Reader
Follow the steps below to connect and get your reader up
and communicating with its host.
1. Configure the Base Station starting on this page.
2. Charge the Batteries (see page 14).
3. Link to the Base Station (see page 18).
4. Select the Interface Type (see page 21).
5. Configure the Reader starting on page 32 (optional,
depends on settings needed).
NOTE
According to recent modification of Regulation for
shipping Li-Ion based battery packs, the products
and their spare battery packs parts are shipped
with a very low residual charge (low state of
charge).
Hence the needs
* that a new product must be fully recharged
before starting to use it.
and
* that battery packs of the stocked products GBT/
GM45 and spare battery pack parts must be peri-
odically recharged: for instance by using a
WLC4090 cradle powered up with a 12V Datalogic
AC/DC adapter (cod.8-0935) for at least 30 min-
utes each 3 months.