Installation manual

STAR-LINK™
10
2
Control Events
Event
Description
AliveEvent
Answers to the ALIVE command sent from a base station. It
contains two pieces of information: the number of the base
stations to which the Alive command was sent and a string of
information about the base station
DataEvent
Sends to the container an event containing two pieces of
information: the device identifier and the received data
DeviceInfoEvent
Sent to the container when a device becomes part of the
network
ErrorEvent
Sends to the container an event containing two pieces of
information: the error number and its description
LostFrameEvent
Sent to the container when one or more devices loose a
frame.
SatCfgEvent
Sent to the container to reply to a configuration request of the
base station. It contains the base station ID about which the
information has been requested. Before starting the event, the
control sets all the properties of that particular base station
correctly.
SleepSat
Sent to the container to communicate that a base station is in
the Sleep state, that is it has not replied to the data collection
request for several times.
StatusEvent
It is an event sent to the container to reply to a status request
of the base station. It contains the base station ID about which
we asked the information. Before starting the event, the
control sets the properties of about the number of bytes free
for that particular base station.