Installation manual

STAR-LINK™
98
A
Status button: shows the state of the receiving and transmission buffer of the
selected base station (or the first one of the list if no base station has been
selected).
Exit button: closes the dialog and saves the network configuration for the current
session. It is possible to save the configuration to file by selecting the Save
Configuration option from the Settings menu.
− Devices: by choosing this option or clicking on the
icon the following
dialog box appears:
Figure 9 - Device network
The check box positioned on the left side of each address allows sending or not
data packets from that device to the application. If the check box corresponding
to the desired device is not ticked, the application will not receive data anymore.
Add button: has the same function as described for the base station
management.
Remove button: has the same function as described for the base station
management.
Answer button: allows setting a string to answer to the devices transmitting in 2
way mode.
Check “echo Answer“: by ticking the check box the program sends the same
frame previously received by a device working in 2 way mode. If the check box is
not ticked, the program will send the OK default answer (as shown in Figure 9).