Installation manual

STAR ★ GATE™

2 INSTALLATION

2.1 POSITIONING STARGATE™

Before connecting the STARGATE™ base station, it is first necessary to position it

so that the RF transmission and reception is possible.

To position STARGATE™, bear in mind the following fundamental guidelines:

1. the maximum distance between base station and RF device is about 50 m (in

surfaces which are perpendicular to the base station antenna);

2. the effective radio coverage depends on the physical structure of the

environment in which it operates, and to the presence or absence of obstacles

(metal structures, walls, electrical systems, etc.);

3. the base station operates at temperatures between 0° and + 50 °C, with humidity

at less than 90% (no condensation);

4. to obtain the best reception/transmission performance, mount the

STARGATE™ base station away from large metal structures which could absorb

or reflect Radio Frequency;

STARGATE™ can be mounted for desktop usage or it can be fixed to a wall.

2.1.1 Desktop Use

For desktop use, STARGATE™ is already correctly positioned :

1. Carefully clean the rubber feet seat of the STARGATE™ base to remove any

impurities that could reduce adhesion;

2. Remove the protective plastic from the rubber feet and stick them onto the

bottom surface of the base;

3. Insert the antenna in the appropriate hole on the body of the base station and

screw it clockwise until tight.