User's Manual

M2SD50NBT
Datasheet
 17

9 MECHANICALSPECIFICATIONS


Figure4:M.2mechanicaldrawings
Note: TheWi‐FiMACaddressislocatedontheproductlabel.TheBTMACaddressisalwaysbenumerically
subsequenttotheWi‐FiMACaddress.Therefore,theBTMACaddressisWi‐FiMACaddressplusone.
10 MOUNTING
TheM2SD50NBTconnectstothehostviaastandardPCIEXPRESSM2connector.
Kyocera’s(www.Kyocera‐connector.com ) 6411seriesprovide1.8mm,2.3mmand3.2mmconnectorheights.
M2SD50NBTisasignal‐sidecomponentmodule;Lairdrecommendspartnumber
24‐6411‐067‐101‐897Ewhichhas2.3mmconnectorheight.

Thestand‐offmatingtotherecommend2.3mmconnectorfromEMISTOP(www.EMISTOP.com)ispartnumber
F50M16‐041525P1D4M.DetaillayoutandstencilopeningareshowinFigure5.