User`s manual

RHINO™
20
2
2.8 FUSE REPLACEMENT FOR THE RHINO™
The RHINO™ uses a 125V, 4A time delay (slow blow), high current interrupting rating fuse
that is externally accessible and user replaceable. Should it need replacement, replace with
same size, rating and type of fuse.
Figure 24 - Fuse Replacement
A. Fuse
B. Twist in this direction to remove (counter-clockwise)
C. Twist in this direction to insert (clockwise)
1. Turn the RHINO™ off and disconnect the power cable from the RHINO™.
2. While holding the RHINO™ over a level surface, push the fuse cover in and twist it one
quarter turn counterclockwise. A flat head screwdriver may be used to twist the fuse
cover.
3. Remove the fuse.
4. Discard the fuse and place a new fuse in the holder.
5. Push the fuse in and twist it clockwise one quarter turn.
6. Reconnect the power cable to the RHINO™.