Specifications

RS-232/USB-Com Interfaces

52 QuickScan

Lite QW2100

ENTER/EXIT PROGRAMMING MODE

Enable Character

Specifies the value of the RS-232 host command used to enable the reader.

ASCII characters or any hex value from 0 to 0xFF can be selected. See

Enable Character on

page 256

for more detailed programming instructions.

NOTE

Setting to previously defined characters such as XON,

XOFF, or host commands conflicts with normal opera-

tion of these characters. 8-bit data is not recognized

when the option

Data Bits has been set as 7 Data Bits.

$CR2EC

Select Enable Character Setting

DEFAULT

0x45 = Enable Character is ‘E’