QuickScanTM Lite QW2100 General Purpose Corded Handheld Linear Imager Bar Code Reader Quick Reference Guide
Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 USA Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”).
Datalogic Scanning, Inc. QUICKSCAN TM PRODUCT SERIES END USER LICENSE AGREEMENT Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement.
alogic's or its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End User shall have no right to commence any legal actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent marking, or other intellectual property notices contained in or on the Datalogic Product. 5. Proprietary Information. 5.
EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT.
Software Product Policy Datalogic reserves the right to ship its products with the latest version of software/firmware available. This provides our customers with the very latest in Datalogic software technology. The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly defines the terms and conditions for making software/firmware changes in products shipped to the buyer.
Connect/Disconnect Cable 1 Connect/Disconnect Cable Connect Host Interface 2 Keyboard Wedge Interface Key bo ard 23 2 RS-232 Interface RS - B USB Interface US Quick Reference Guide 5
Aim and Scan 3 012345 012345 65° 65° 6 TM QuickScan Lite QW2100
Parts of the Reader Parts of the Reader 1 3 2 4 1. LED 3. Scan Window 2. Cable Release Hole 4.
Programming Bar Codes For your convenience, this guide includes the programming bar codes required to configure the reader for use with different interface (terminal/host) types. See the Product Reference Guide (PRG) for more complete information about programming and configurable features. You can download the latest version of the PRG and any other available publications for the reader from the website listed on the back cover of this manual.
Programming Bar Codes RS-232 Interface To use an RS-232 interface, scan the bar code for the desired RS-232 host type.
USB Interface The reader attaches directly to a USB host, or a powered USB hub, and is powered by it. No additional power supply is required. When using a USB interface, the reader auto-detects the USB and defaults to the USB Keyboard interface. Select USB-COM-STD1 (simulates RS-232 standard interface) Select USB Keyboard (with standard key encoding) Select USB Alternate Keyboard (with alternate key encoding) Select USB OEM 1. 10 Download the correct USB Com driver from www.datalogic.com.
Programming Bar Codes Keyboard Wedge Interface To use a Keyboard Wedge interface, scan the bar code for the desired keyboard type. Select KBD-AT (AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Standard Key Encoding) Select KBD-AT-NK (IBM AT PS2 with standard key encoding but without external kbd.
Scanning Modes If the interface type is changed, scanner configuration may be automatically reset to a different Scanning Mode.
Scanning Modes Scan Mode = Trigger Single Scan Mode = Trigger Hold Multiple Scan Mode = Trigger Pulse Multiple Scan Mode = Flashing Scan Mode = Always On Scan Mode = Stand Mode Scan Mode = Trigger Object Sense Quick Reference Guide 13
Troubleshooting Problem Possible Cause Possible Solutions No power to the reader. Check system power. Ensure power supply is connected. Interface or power cables are loose. Ensure all cable connections are secure. Reader not programmed for correct bar code type. Ensure reader is programmed to read the type of bar code scanned. Refer to the Product Reference Guide (PRG) for more information. Bar code label is unreadable. Check the label to ensure it is not defaced.
LED and Beeper Indications LED and Beeper Indications The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the reader. A “Green Spot” also lights to indicate a good read. The tables below list these indications. One exception to the behaviors listed in the tables is that the reader’s functions are programmable, and may or may not be turned on. For example, certain indications, such as the power-up beep can be disabled using programming bar code labels.
Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & CAUTION Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
Reader Labeling Radio Frequency Interference Requirements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warranty Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship for a period of 3 years from product shipment. Datalogic Scanning Limited Factory Warranty Warranty Coverage Datalogic Scanning (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use.
Reader Labeling (ii) (iii) (iv) (v) (vi) (vii) (viii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic; any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus; any claimed defect or damage caused by the failure to provide proper maintenance, including but not lim
NOTES 20 TM QuickScan Lite QW2100
DECLARATION OF CONFORMITY 11 EC-67 Rev.: 0 Pag.: 1 di 1 Datalogic Scanning, Inc. 959 Terry St.
Australia Italy Datalogic Scanning Pty Ltd Telephone: [61] (2) 9870 3200 australia.scanning@datalogic.com Datalogic Scanning SpA Telephone: [39] (0) 39/62903.1 italy.scanning@datalogic.com China Japan Datalogic Scanning Shanghai Telephone: 86-21-62076670 china.scanning@datalogic.com Datalogic Scanning KK Telephone: 81 (0)3 3491 6761 japan.scanning@datalogic.com Germany Latin America Datalogic Scanning GmbH Telephone: 49 (0) 61 51/93 58-0 germany.scanning@datalogic.
