2983.
983.book Page 2 Monday, January 12, 2009 12:43 PM Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”).
2983.book Page 1 Monday, January 12, 2009 12:43 PM Datalogic Scanning, Inc. QUICKSCAN® PRODUCT SERIES END USER LICENSE AGREEMENT Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement.
2983.book Page 2 Monday, January 12, 2009 12:43 PM 2.2 receipt or use of the source code to any Software. End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for purposes other than as expressly provided in this Agreement, without Datalogic's prior written consent. 3.
2983.book Page 3 Monday, January 12, 2009 12:43 PM 6.2 responding to End User's problem reports according to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the product will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance.
2983.book Page 4 Monday, January 12, 2009 12:43 PM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 9. Government Restricted Rights; International Use. 9.1 9.2 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer Software clause at DFARS 252.
2983.book Page 5 Monday, January 12, 2009 12:43 PM Software Product Policy Software Product Policy Datalogic reserves the right to ship its products with the latest version of software/firmware available. This provides our customers with the very latest in Datalogic software technology. The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly defines the terms and conditions for making software/firmware changes in products shipped to the buyer.
2983.
2983.
2983.
2983.
2983.book Page 4 Monday, January 12, 2009 12:43 PM Always On — No trigger pull is required to read a barcode. Scanning is continually on. If the trigger is pulled, the reader acts as if it is in Trigger Single Mode. Double Read Timeout1 prevents undesired multiple reads while in this mode. Stand Mode — No trigger pull is required to read a bar code. Scan- ning is turned on automatically when an item is placed in reader’s field of view.
2983.
2983.book Page 6 Monday, January 12, 2009 12:43 PM Troubleshooting Problem Possible Cause Nothing happens when the scan button is pulled. Possible Solutions No power to the imager. Check system power. Ensure power supply is connected. Interface or power cables are loose. Ensure all cable connections are secure. Imager not proLED comes on, but bargrammed for correct code does not decode. barcode type. Ensure imager is programmed to read the type of barcode scanned.
2983.book Page 7 Monday, January 12, 2009 12:43 PM LED and Beeper Indications LED and Beeper Indications The imager’s beeper sounds and its LED illuminates to indicate various functions or errors on the reader. A “Green Spot” also lights to indicate a good read. The tables below list these indications. One exception to the behaviors listed in the tables is that the reader’s functions are programmable, and may or may not be turned on.
2983.book Page 8 Monday, January 12, 2009 12:43 PM Programming Barcodes For your convenience, this guide includes the programming barcodes required to configure the imager for use with different interface (terminal/host) types. See the Product Reference Guide (PRG) for more complete information about programming and configurable features. You can download the latest version of the PRG and any other available publications for the imager from the website listed on the back cover of this manual.
2983.book Page 9 Monday, January 12, 2009 12:43 PM Programming Barcodes RS-232 Interface To use an RS-232 interface, scan the barcode for the desired RS-232 host type.
2983.book Page 10 Monday, January 12, 2009 12:43 PM USB Interface The imager attaches directly to a USB host, or a powered USB hub, and is powered by it. No additional power supply is required. When using a USB interface, the imager auto-detects the USB and defaults to the HID keyboard interface.
2983.book Page 11 Monday, January 12, 2009 12:43 PM Programming Barcodes Keyboard Wedge Interface To use a Keyboard Wedge interface, scan the barcode for the desired keyboard type. Select KBD-AT (AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Standard Key Encoding) Select KBD-AT-NK (IBM AT PS2 with standard key encoding but without external kbd.
2983.
2983.book Page 13 Monday, January 12, 2009 12:43 PM Ergonomic Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & CAUTION Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
2983.book Page 14 Monday, January 12, 2009 12:43 PM Hinweis Benutzen Sie nur eine von Datalogic genehmigte Stromversorgung. Die Modelle erfordern eine Stromquelle der Klasse II oder III mit einer Leistungsbegrenzung (LPS). Für eine gültige Sicherheitszertifizierung müssen Klasse III Stromquellen am Eingang nach den Bestimmungen IEC/EN60950-1 (EN 60335-Serien, EN 60065 oder entsprechenden) zugelassen sein. Eingang: 100 - 240 VACAusgang: 5.2 VDC Max. Strom: 0.4 AmpsMax.
2983.book Page 15 Monday, January 12, 2009 12:43 PM Replacing the Scan Window Replacing the Scan Window If the Scan Window becomes scratched, broken or contaminated with heavy dust, fix it by removing the Nose Boot and cleaning or installing a new window. Datalogic offers a replacement window as an orderable accessory. Nose Boot Scan Window To replace the Scan Window, first remove power from the imager then hold the imager with the Scan Window facing up.
2983.book Page 16 Monday, January 12, 2009 12:43 PM Imager Labeling Labels are shown here to illustrate their location only. Please view the labels on your product for actual details. S/N Laser & Regulatory Regulatory & Serial Number FOR LASER VERSION: COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50 DATED JUNE 24, 2007. IEC/EN60825-1:2007. SEE QRG FOR PATENT INFO.
2983.book Page 17 Monday, January 12, 2009 12:43 PM Imager Labeling Warranty Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship for a period of 5 years from product shipment. In order to obtain service under this Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the Warranty period and obtain from Datalogic a return authorization number for return of the product to designated Datalogic service center.
2983.
2983.book Page 1 Monday, January 12, 2009 12:43 PM EUROPEAN DECLARATION OF CONFORMITY Datalogic Scanning, Inc.
2983.book Page 2 Monday, January 12, 2009 12:43 PM Australia Japan Datalogic Scanning Pty Ltd Telephone: [61] (2) 9870 3200 australia.scanning@datalogic.com Datalogic Scanning KK Telephone: 81 (0)3 3491 6761 japan.scanning@datalogic.com France and Benelux Latin America Datalogic Scanning Sarl Telephone: [33].01.64.86.71.00 france.scanning@datalogic.com Datalogic Scanning, Inc Telephone: (305) 591-3222 latinamerica.scanning@datalogic.
