Instruction manual

RAPID CONFIGURATION

STEP 2 – MOUNT AND POSITION THE READER

1. To mount the Matrix 300™, use the mounting brackets to obtain the most suitable

position for the reader. The most common mounting configuration is shown in the figure

below.

Figure 2 –Positioning with Mounting Bracket

2. When mounting the Matrix 300™ take into consideration these three ideal label position

angles: Pitch or Skew 10° to 20° and Tilt 0°, although the reader can read a code at any tilt

angle provided the code fits into the Field Of View (FOV).

Figure 3 – Pitch, Tilt and Skew Angles

3. Refer to the reading diagrams in chp. 6 to determine the distance your reader should be

positioned at.

NOTE: Rapid Configuration of the Matrix 300™ reader can be made either

through the X-PRESS™ interface (steps 3-4) which requires no PC

connection, or by using the VisiSet™ Setup Wizard (steps 5-6). Select the

procedure according to your needs.

Tilt

Pitch

Minimize

No Pitch, Tilt or Skew

Tilt

any angle

inside FOV

Skew

Assure at least 10°

FOV