Instruction manual

SOFTWARE CONFIGURATION

103

7 SOFTWARE CONFIGURATION

Software configuration of your Matrix 300™ for static reading or simple code reading

applications can be accomplished by the Rapid Configuration procedure using the

X-PRESS™ HMI (which requires no external configuration program) or by using the

VisiSet™ Setup Wizard for easy setup. These procedures are described in chapter 1.

For other applications use VisiSet™, connecting to the reader through one of the serial ports.

NOTE: For Ethernet applications, connections to VisiSet™ can be made

directly through the Ethernet port of the reader, or QL500 or BM2x0 Host

Interface module. See the "Configuration Through Ethernet" page in the

VisiSet™ Help On-Line, or the "Matrix Family Setup Procedure Using

Programming Barcodes" document on the Mini-DVD.

7.1 VISISET™ SYSTEM REQUIREMENTS

To install and run VisiSet™ you should have a Laptop or PC that meets or exceeds the

following:

 Pentium processor

 Windows: 98/2000, NT 4.0, XP, Vista, 7 or 8

 32 MB Ram

 5 MB free HD space

 one free RS232 serial port with 115 Kbaud (or USB-Serial adapter)

 one Ethernet TCP/IP port

 Video Adapter (1024 x 768) or better using more than 256 colors

7.2 INSTALLING VISISET™

To install VisiSet™, proceed as follows:

1. Turn on the Laptop or PC that will be used for configuration (connected to the Matrix

300™ communication ports).

2. After Windows finishes booting, insert the Mini-DVD provided.

3. Launch VisiSet™ installation by clicking Install.

4. Follow the instructions in the installation procedure.