Installation manual

QLM700 INSTALLATION MANUAL

MECHANICAL INSTALLATION

QLM700 can be mounted to various surfaces using the two M5x20 screw and washers

included in the package:

 The M5x20 screws can be used to mount the QLM700 to metallic/plastic surfaces already

prepared with M5 threaded holes.

 QLM700 can also be mounted to a Bosch Frame using the two M5x20 screws included in

the package, plus two specific commercial T-nuts (for example the Bosch Rexroth T-nut 10

M5, cod. 3 842 530 283).

 Mounting to other surfaces, such as concrete walls or metallic panels, requires

appropriate user-supplied parts (screws, screw anchors, nuts, etc).

The diagram below gives the overall dimensions of the QLM700 and shows the mounting

through-holes.

[1.55]

9.5

[0.37]

5.5

[0.22]

n° 2

5.5

[0.22]

n° 4

188

[7.40]

200

[7.88]

53.5

[2.11]

[3.18]

= =

Figure 2 - Overall Dimensions

Mounting

Slots (6)

[in]