User Manual

Data Format Enter/Exit Programming Mode

Product Reference Guide

Individually Set Label ID

This feature configures a Label ID individually for a single symbology. To set, first define

whether you want it as a prefix or suffix by scanning a label below. Then turn to Label ID Sym-

bology Selection − 1D Sy

mbologies, starting on page 62 to select the symbology you want to

set, followed by up to 3 characters from the ASCII Chart

at the back of this manual. See "Label

ID: Set Individually Per Symbology" on page 258 for detailed instructions o

n setting this feature.

Label ID Control

This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given sym-

bology type.

DEFAULT

$CIDCO00(CR)

Label ID Transmission = Disable

$CIDCO01(CR)

Label ID Transmission = Enable as Prefix

$CIDCO02(CR)

Label ID Transmission = Enable as Suffix