User Manual

Symbology Selection Enter/Exit Programming Mode
Product Reference Guide 207
Micro QR Code Set Length 2
This feature specifies one of the bar code lengths for Micro QR Code Length Control on page
205. Length 2 is the maximum label length if in V
ariable Length Mode, or the second fixed
length if in Fixed Length Mode. Char
acters can be set from 0001 to 0035 characters in incre-
ments of 0001 (pad with zeroes).
See page 251 for detailed instructions on setting this feature.
$CMQL2
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 0035 Characters