User Manual

Enter/Exit Programming Mode
198 QuickScan™ I QD24XX/QBT24XX/QM24XX
PDF417 Set Length 2
This feature specifies one of the bar code lengths for PDF417 Length Control on page 196.
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed
Length Mode. Length includes the bar code’s check, data, and full-ASCII shift charac-
ters. The length does not include start/stop charac
ters. Characters can be set from 01 to 2,710
characters (pad with zeroes) in increments of 01. Any value greater than 2,710 will be consid-
ered to be 2,710.
See page 251 for detailed instructions on setting this feature.
$CP4L2
Select PDF417 Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
a
t left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing
your desired character(s). End b
y scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 2,710 Characters