User Manual

1D Symbologies Enter/Exit Programming Mode

Product Reference Guide

179

Plessey Set Length 2

This feature specifies one of the bar code lengths for Plessey Length Control on page 177.

Length 2 is the maximum label length if in Variable Length on page 251 Mode, or the second

fixed length if in Fixed Length on page 251 Mode. Length includes the bar code’s check, data,

and full-ASCII shift characters. The length does not include start/stop characters.

The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length

nly one fixed length).

Table 24 provides examples for setting Length 2. See page 251 for detailed instructions on set-

ting this feature.

Table 24. Plessey Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT PLESSEY LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CPLL2

Select Plessey Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and not save

the entry string. You can then start again at the beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters