User Manual

Enter/Exit Programming Mode Code 93

170 QuickScan™ I QD24XX/QBT24XX/QM24XX

Code 93 Set Length 2

This feature specifies one of the bar code lengths for Code 93 Length Control on page 168.

Length 2 is the maximum label length if in Variable Length on page 251 Mode, or the second

fixed length if in Fixed Length on page 251 Mode. Length includes the bar code’s check, data,

and full-ASCII shift characters. The length does not include start/stop characters. The length

an be set from 1 to 50 characters. A setting of 0 specifies to ignore this length (only one fixed

length).

Table 20 provides examples for setting Length 2. See page 251 for detailed instructions on set-

ting this feature.

Table 20. CODE 93 Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 93 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC9L2

Select Code 93 Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and not save

the entry string. You can then start again at the beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters