User Manual

1D Symbologies Enter/Exit Programming Mode

Product Reference Guide

163

GS1 DataBar™ Expanded Set Length 1

This feature specifies one of the bar code lengths for GS1 DataBar™ Expanded Length Control

on page 162. Length 1 is the minimum label length if in Variable Length on page 251 Mode, or

the first fixed length if in Fixed Length on page 251 Mode. Length includes the bar code’s

data

characters only. The length can be set from 1 to 74 characters.

Table 17 provides some examples for setting Length 1. See page 251 for detailed instructions

on setting this feature.

Table 17. GS1 DataBar™ Expanded Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Character 07 Characters 52 Characters 74 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘5’ and ‘2’ ‘7’ AND ‘4’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CXBL1

Select GS1 DataBar™ Expanded Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

01 = Length 1 is 1 Character