User Manual

Enter/Exit Programming Mode Standard 2 of 5

140 QuickScan™ I QD24XX/QBT24XX/QM24XX

Standard 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for Standard 2 of 5 Length Control on page

138. Length 2 is the maximum label length if in Variable Length on page 138 Mode, or the sec-

ond fixed length if in Fixed Length on page 115 Mode. Length includes the

bar code’s check

and data characters.

The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length

(on

ly one fixed length).

Table 10 provides examples for setting Length 2. See page 251 for detailed instructions on set-

ting this feature.

Table 10. Standard 2 of 5 Length 2 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (pad with

leading zeroes)

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CS2L2

Select Standard 2 of 5 Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters