User Manual

Enter/Exit Programming Mode Interleaved 2 of 5 (I 2 of 5)

134 QuickScan™ I QD24XX/QBT24XX/QM24XX

I 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for I 2 of 5 Length Control on page 133.

Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in

xed Length Mode. The length includes the bar code’s check and data characters. The length

can be set from 2 to 50 characters in increments of two.

Table 7 provides some examples for setting Length 1. See page 251 for detailed instructions on

setting this feature.

Table 7. I 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

2 Characters 6 Characters 14 Characters 50 Characters

Pad with leading zeroes to

yield two digit

02 06 14 50

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT I 2 of 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘2’ ‘0’ and ‘6’ ‘1’ and ‘4’ ‘5’ AND ‘0’

6 Scan ENTER/EXIT PROGRAMMING MODE

$CI2L1

Select I 2 of 5 Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

06 = Length 1 is 6 Characters