User Manual

1D Symbologies Enter/Exit Programming Mode

Product Reference Guide

125

Code 128 Set Length 1

Specifies one of the bar code lengths for Code 128 Length Control on page 124. Length 1 is the

minimum label length if in Variable Length on page 251 Mode, or the first fixed length if in

Fixed Length on page 251 Mode. Length includes the bar code’s data characters

only. The

length can be set from 1 to 80 characters.

Table 5 provides some examples for setting Length 1. See page 251 for detailed instructions on

setting this feature.

Table 5. Code 128 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Character 07 Characters 15 Characters 80 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 128 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘8’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC8L1

Select Code 128 Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

01 = Length 1 is 1 Character