User Manual

Enter/Exit Programming Mode Code 39

116 QuickScan™ I QD24XX/QBT24XX/QM24XX

Code 39 Set Length 1

This feature specifies one of the bar code lengths for Code 39 Length Control on page 115.

Length 1 is the minimum

label length if in Variable Length on page 115 Mode, or the first fixed

length if in Fixed Length on page 115 Mode. Length includes the bar code’s data characters

only. The length can be set from 0 to 50 characters.

Table 3 provides examples for setting Length 1. See page 251 for detailed instructions on set-

ting this feature.

Table 3. Code 39 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 39 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC3L1

Select Code 39 Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

02 = Length 1 is 2 Characters