User manual

Default Parameters
Product Reference Guide 21
Default Parameters
The scanner can be reset using one of two default settings: factory defaults or custom de-
faults. Scan the appropriate bar code(s) below to reset the scanner to its default settings
and/or set the scanner’s current settings as the custom default.
Set Factory Defaults — Scan the Set Factory Defaults bar code below to eliminate all
custom default values and return the scanner to factory default values. (For factory de-
fault values, see Appendix B, Standard Defaults.)
Write to Custom Defaults — Custom default parameters can be configured to set
unique default values for all parameters. After changing all parameters to the desired de-
fault values, scan the Write to Custom Defaults bar code below to configure custom de-
faults.
Restore Defaults
Resets all default parameters as follows:
• If custom default values were configured (see Write to Custom Defaults above), the cus-
tom default values are set for all parameters each time the Restore Defaults bar code belo
w
is scanned.
•
If no custom default values were configured, the factory default values are se
t for all
param
eters each time the Restore Defaults bar code below is scanned. (For factory defaul
t
values, see
Appendix B, Standard Defaults.)
Set Factory Defaults
Write to Custom Defaults
*Restore Defaults