Operation Manual

Product Reference Guide 91
\
Enter Reader Configuration
DATA FORMAT
Exit and Save Reader Configuration
Symbology Character Substitution
1. Select a Datalogic Standard Code Identifier from the Code Identifier Table in
Appendix D.
2. Read the corresponding character as Hex v
alue from the Hex/Numeric table which
identifies the character to be substituted. Valid value is in the range 00-7F.
3. Read the corresponding character as Hex v
alue from the Hex/Numeric table which
identifies the new substituting character. Valid value is in the range 00-7F.
4. Read the following code to enable
the configuration you have set.
Character Substitution
1. Select a Datalogic Standard Code Identifier from the Code Identifier Table in
Appendix D.
2. 0 = disabled
1 = enabled
Symbology Character Deletion
1. Select a Datalogic Standard Code Identifier from the Code Identifier Table in
Appendix D.
2. Read the corresponding character as Hex v
alue from the Hex/Numeric table which
identifies the character to be deleted. Valid value is in the range 00-7F.
3. Read the following code to enable
the configuration you have set.
Symbology Character Substitution
AOCPBLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFAGGIK
AKCBPJCJGIIJCMCFGLKMBHMJPK
AEFBJLBGMHPKMKHEEDGFDMGHGK
AAPHBAJJDCFDBILOKBFBDLPDDK
AHKFAINIMEHCEPHBKFHEKPGIIK
DLLLLDLDDLDLLLLDLDDDDLDLLL
Character Substitution
AOCPBLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGGIK
AKCBPJCJGIIJCMCEHIOKMIBLLK
AEFBJLBGMHPKMIEMGJJLHHPFGK
AAPHBAJJCCBDNBLDEGHOFPEFFK
AGKFAIPCKMMKCNMCABKAGKBKIK
DDLLLDLDLDDLLLLDDDLDDLDLLL
Symbology Character Deletion
AOCLFPHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBCHIK
AKCBPJCJGIIJCMCEGNKPOMNLPK
AEFBJLBGMHPLNNHGKPAHOOKHGK
AAPHBAJJDCBHOFBHELNHMNODHK
AFKFAOPKHIGEGLDIJLMCIHMKIK
DLLLLDLDDLLLLLLDLDDDDLDLDL