Operation Manual

90 PowerScan™ M8500
Enter Reader Configuration
DATA FORMAT
Exit and Save Reader Configuration
Headers
1. Select a Datalogic Standard Code Identifier from the Code Identifier Table in
Appendix D.
2. 0 = disabled
1 = enabled
Symbology Terminators
1. Select a Datalogic Standard Code Identifier from the Code Identifier Table in
Appendix D.
2. Set the number of characters in the range 0-5.
3. Read the corresponding characters as Hex values from the Hex/Numeric table. Valid
val
ues are in the range:
• 00-7F for RS-232, USB BULK, USB COM,
USB Generic HID
• 00-9B for Wedge and USB Keyboard
4. Read the following code to enable the configuration you have set.
Terminators
1. Select a Datalogic Standard Code Identifier from the Code Identifier Table in
Appendix D.
2. 0 = disabled
1 = enabled
Headers
AOCPFPHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEBGEIK
AKCBPJCJGIIJCMCFHKPEEAKDLK
AEFBJLBGMHPKNPAPMMGMNIIHGK
AAPHBAJIDDEICPPPODIOCPCPHK
AELFANOCPAJCGLHLEJKOEMJJLK
DLLLLDLDLLDLLLLDLLDDDLDLLL
Symbology Terminators
AOCPFLHMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFGAGIK
AKCBPJCJGIIJCMCFGONFOBJDNK
AEFBJLBGMHPKNNEAEHPKOFLEGK
AAPHBAJJCGHCOJIBHCKOKDDDBK
AEKFAJODOLLAKFFGFDDOCKLKIK
DDDLLDLDLDLLLLLDLDLDDLDLDL
Terminators
AOCPFLHMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEDAGIK
AKCBPJCJGIIJCMCEHNJDDOEBJK
AEFBJLBGMHPKNPHIGNAEKOCGGK
AAPHBAJJDGDCCAIMJFIBMHIFHK
AFKFAJMJIDAIMHOFPHOKOPMIIK
DLDLLDLDDLLLLLLDDDDDDLDLDL