Operation Manual

80 PowerScan™ M8500

Enter Reader Configuration

DATA FORMAT

Exit and Save Reader Configuration

Custom Code Identifier

The following procedure sets a new Code Identifier for a specific barcode symbology:

1. Read the Enter Reader Configuration code at the top of the page.

2. Read one of the following codes that corresponds to the r

quired barcode symbology.

3. Define 1 or 2 identifying characters for each code

type. If only 1 identifying character

is required, the second character must be selected as FF (disabled). Read the hexadeci-

mal value corresponding to the character(s) you want to define as identifiers for the

symbology selected in step

2: valid characters are in the range 00-FD.

Example: To define Code 39 Code Identifier = @

Valid characters are in the range:

00-FD

Read

Code 39

40 + FF

= @

EAN/UPC



CODABAR

CODE 128



CODE EAN 128

CODE 93



CODE 39

2/5 INTERLEAVED

