Operation Manual

74 PowerScan™ M8500
Enter Reader Configuration
NETWORK PARAMETERS
Exit and Save Reader Configuration
RS-485 Network
See "Multidrop STAR-System™ Network Layouts" on page 31 for details.
Network Baud Rate
 disable RS-485 network
enable RS-485 slave
enable RS-485 master
If a BC-8060 cradle is errantly configured as a Slave but not connected to
a network, it may not be able to receive further commands from the
reader. In this case it can be reconfigured by executing the BIND proce-
dure, which returns the cradle to Stand-alone configuration.
9600
19200
 38400