Operation Manual

Operating Mode on page 69
Minimum Output Pulse on page 70
Conversion to Code 39 on page 70
Overflow on page 71
Output Level on page 71
Idle Level on page 72
Inter-Block Delay on page 72
68 PowerScan™ M8500
PEN EMULATION
1. Read the Enter Configuration code ONCE, available at the top of each page.
2. Read configuration codes from the desired groups.
= Read the code and follow the procedure given
= Default value
3. Read the Exit and Save Configuration code ONCE, available at the top of each
programming page.
PowerScan™ M8500/BC-80X0 configurations only

