Operation Manual

64 PowerScan™ M8500
Enter Reader Configuration
WEDGE PARAMETERS
Exit and Save Reader Configuration
Caps Lock Auto-Recognition (IBM AT compatible only)
Num Lock
This selection is used together with the Alt Mode interface selection for AT or Notebook
PCs.
It changes the way the Alt Mode procedure is executed; the
refore it should be set as follows:
• if your keyboard Num Lock is normally on use num lock unchanged
• if your keyboard Num Lock is normally off use toggle num lock
In this way the device will execute the Alt Mode procedur
e correctly for your application.
Read 2 numbers from the Hex & Numeric Table where:
00 = DELAY disabled
01-99 = DELAY from 1 to 99 milliseconds
 delay disabled
Inter-character Delay
disable
 enable
toggle num lock
 num loc
k unchanged
delay between characters transmitted to Host
