Operation Manual

Read 2 numbers from the Hex & Numeric Table where:
00 = TIMEOUT disabled
01-99 = TIMEOUT from
.1 to 9.9 seconds
 rx timeout 5 seconds
Product Reference Guide 53
\
Enter Reader Configuration
RS-232 PARAMETERS
Exit and Save Reader Configuration
RX Timeout
See "RX Timeout" on page 151 for details.

• First Character enables device trigger
• Second Character inhibits device trigger until the first character is received
agai
n.
Serial Trigger Lock
 disabled
timeout control in reception from Host
enable and select characters
Read 2 characters from the Hex & Numeric Table in the range 00-FE where:
