Operation Manual

Setup Procedures
Product Reference Guide 39
BC-8060 STAR-System™ Network Setup
When the BC-8060 cradle model is used in an RS-485 network, it must be initially
configured. To do this using configuration barcodes, follow the procedure below using any
PowerScan™ M8500 reader.
four digits for the BC-8060 Address (from 0000 to 1999 ).
All cradles used in the network must hav
e different addresses.
Read the Bind code to pair the PowerScan™ M8500 to the BC-8060 cradle for configu-
ration.
The green LED on the PowerScan™ M8500 will blink; the reader is ready to be inserted
into the cradle.
Firmly insert the reader into the BC-8060 cradle within 10 seconds, a beep will be
emitted
, signaling that the BC-8060 cradle has been paired to the PowerScan™ M8500,
and the green LED on the reader will go off.
1. Set BC-8060 Address
+
2. Exit and Save configuration
3.
Bind
4.
5.
Read the BC-8060 restore default code:
Restore BC-8060 Default