Operation Manual

Technical Features
186 PowerScan™ M8500
IMB
Selection Disabled
Maxicode
Maxicode Mode 0 Disabled
Maxicode Mode 1 Disabled
Maxicode Mode 2 Disabled
Maxicode Mode 3 Disabled
Maxicode Mode 4 Disabled
Maxicode Mode 5 Disabled
Maxicode Mode 6 Disabled
Aztec
Selection Disabled
Composite Codes
Selection Disabled
Discard Linear Part Enabled
Reading Parameters
Trigger Mode Trigger level
Trigger Type Normal trigger
Flash ON 2 sec
Flash OFF 2 sec
Beeper Tone Tone 1
Beeper Volume High volume
Beeper Duration 50 ms
Reads per Cycle One read per cycle
Scan Timeout 5 sec
User Defined Beeper Tone Tone 1
User Defined Beeper Volume High Volume
User Defined Beeper Duration 100 ms
Codes per Scan One code per scan
Central Code Transmission Disabled
Order by Code Length Disabled
Order by Code Symbology Disabled
Autoscan Mode Disabled
Autoscan Aiming System Enabled
Autoscan Hardware Trigger Enabled
Autoscan Illumination System Disabled
Safety Time
500 ms (if Autoscan mode or Software trigger type is selected
and the M
ultiple Reads per Cycle option is enabled.
Radio Communication
Radio Protocol Timeout 2s
Radio RX Timeout disabled
Transmission Mode one-way
Beeper Control for Radio Response normal
Find Me enabled
Display and Keyboard
Display Mode local echo
Backlight on
Keypad enabled with default keymap ‘<’ ‘=’ ‘>’