Operation Manual

General View
Product Reference Guide 11
BC-80X0 / C-8000 CRADLES
Figure 4. BC-8000
The label on the cradle contains LED indicators and a scan finder button. When the button
is pressed, the cradle transmits a “broadcast” message. All properly configured scanners
(Radio RX Timeout set to keep the radio “awake”) linked to that base (through a
bind or a
join sequence) and within radio range coverage will emit a beep sequence once every 2
seconds for 30 seconds. A scanner is considered to be linked when the last transmission ends
properly.
The scan finder works only in stand-alone
layout (point to point or multiple readers).
Figure 5. Figure D – C-8000