Operation Manual

Match Conditions
Product Reference Guide 145
Match Conditions
By setting one or more of the following conditions it is possible to select the codes to be
formatted. Follow the given steps to define the desired condition.
MATCH WITH PREDEFINED SUBSTRING
Define Matching Substring
Read the above code and:
Define Substring Position
Read the above code and:
MATCH CODE LENGTH
Define Code Length
Read the above code and:
MATCH SYMBOLOGY
Define Code Symbology
Read the above code and:
Match with Substring
AOCLFLFOHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALFABGIK
AKCBPJCJGIIJCMCFGLIFMPLLLK
AEFBJLBGMHPLMKALHFEAEHMGGK
AAPHBAJICAGKHAKKFDLLOGDNFK
AGKFAKLBIMBCELJEKCHMIJCJKK
DLDLLDLDLDLLLLLDDLLDDLDLDL
1. read a number in the range 1-5 corresponding to the
desired format number;
2. set the number of characters defining the matching
string in the range 00-10;
3. read the corresponding character as Hex value from
the Hex/Numeric table identifying the substring
character/s. Valid values are in the range 00-7F.
(optional)
Matching Substring Position
AOCLFLFOFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJALEFBGIK
AKCBPJCJGIIJCMCEHIMDBAGJPK
AEFBJLBGMHPLMIDDFPLOAMFEGK
AAPHBAJIDACKLJKHLEJEICILDK
AHKFAKJLOEKKCJCHAGKIEMFLKK
DDDLLDLDDLLLLLLDLLDDDLDLDL
1. read a number in the range 1-5 corresponding to the
desired format number;
2. read the number corresponding to the substring
position in the range
0-255 ;
AND/OR
Match Code Length
AOCLFLFMHNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKFDBHIK
AKCBPJCJGIIJCMCEHPOLDEPHNK
AEFBJLBGMHPLMJEHMIMMPOKEGK
AAPHBAJJDEGGOAGMNCEOLPDLHK
AGKFAIJFBNPEGAOAPPFAGNIILK
DLDLLDLDLDDLLLLDLDDDDLDLLL
1. read a number in the range 1-5 corresponding to the
desired format number;
2. read the number in the range
0-255 ;
AND/OR
Match Symbology
AOCLFLFMFNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEGBHIK
AKCBPJCJGIIJCMCFGMKNOLCFJK
AEFBJLBGMHPLMLHPOCDCLFDGGK
AAPHBAJJCECGCJGBDFGBNLINBK
AHKFAILPHFEMACFDFLIEKIPKLK
DDDLLDLDDLDLLLLDDDLDDLDLLL
1. read a number in the range 1-5 corresponding to the
desired format number;
2. set the number of the matching code symbologies in
the range
0-4 ;
3. select the Datalogic Standard Code Identifier from
the Code Identifier Table in Appendix
D .