Operation Manual

POWERSCAN D8590 User’s Manual 2-3
Using ESP
Image Quality
The video view in EZ Mode (and also on the Video tab in I/O Parameters) allows you to
capture images from the imager for further analysis. If Upload Images is checked and you
click the Start button, image captures will be uploaded automatically for every good read.
Images will also be uploaded for every no read, upon release of the imager’s trigger.
You can right-click on a captured image to bring up
the me
nu shown below. If you select
Store higher quality images, you will see a dropdown menu with JPEG 60% quality (small
size), JPEG 80% quality (full size), JPEG 100% quality (full size) and TIFF (full size).
The imager’s illumination setup can be restored by clicking the Defa
ult box in the EZ
Mode view. Refer to the Basic Operations section for more information about the
imager’s illumination capabilities.
Note: If you have difficulty viewing TIFF images, it is recommended that you use Paint or
viewer software that is optimized for TIFF files.
Note: TIFF images are large files and take significantly longer to download than JPEG images.
Right-click on the
image capture to
bring up this menu.
Note: Image size will vary depending on user settings for Region of Interest, and
whether or not Low Resolution Image is checked in the Illumination dialog in ESP
.
Image Save Mode Region of Interest Low Resolution Final Image Size
Small Size (Displayed) 1280 x 1024 No 320 x 256
Small Size 1280 x 1024 Yes 320 x 256
Small Size 800 x 600 No 400 x 296
Small Size 800 x 600 Yes 400 x 296
Full Size 1280 x 1024 No 1280 x 1024
Full Size 1280 x 1024 Yes 640 x 512
Full Size 800 x 600 No 800 x 600
Full Size 800 x 600 Yes 400 x 296 (JPEG); 400 x 300 (TIFF)